how-much

HOW MUCH CAN A CONSUMER PURCHASE?

In each transaction, dispensaries are allowed to sell up to the equivalent of 1 ounce of cannabis. That means up to:

  • 1 ounce of dried flower, or
  • 5 grams of concentrates, resins, or oils, or
  • 1000mg of ingestible products (10 100mg packages) like gummies

Examples of a purchase of a combination of products may be:

  • 1/2 ounce of dried flower plus 2 – 1/2 grams of concentrate
  • 5 packages of gummies and 1/2 ounce of dried flower
  •  
figures

PROMINENT FIGURES IN THE CANNABIS HISTORY

Cannabis has seen a remarkable journey towards acceptance and understanding. Throughout history, individuals from diverse backgrounds have played pivotal roles in reshaping perceptions and advocating for the therapeutic, cultural, and economic potential of this ancient plant. From pioneering physicians and scientists to iconic activists, musicians, and entrepreneurs, these figures have left an indelible mark on the landscape of cannabis. Their stories serve as a testament to the evolving narrative surrounding cannabis.

  • Sir William Brooke O’Shaughnessy (1808-1889): An Irish physician and scientist who made significant contributions to the introduction of cannabis to Western medicine. He played a crucial role in bringing attention to the therapeutic potential of cannabis and promoting its use in medical treatments. O’Shaughnessy conducted the first clinical trials of cannabis preparations, first with safety experiments on mice, dogs, rabbits and cats, then by giving extracts and tinctures to some of his patients. In 1839, O’Shaughnessy published a groundbreaking research paper titled “On the Preparations of the Indian Hemp, or Gunjah” in the Provincial Medical Journal. In this paper, he described the therapeutic uses of cannabis for various conditions, including rheumatism, hydrophobia, cholera, and convulsions. He also highlighted the plant’s analgesic and sedative properties.
  • Dr. Raphael Mechoulam (1930-2023): An Israeli organic chemist, Mechoulam is often referred to as the “father of cannabis research.” His pivotal work in the 1960s involved identifying and synthesizing THC, the psychoactive compound within cannabis. Mechoulam’s groundbreaking research not only demystified the chemical composition of cannabis but also established a solid foundation for subsequent studies on cannabinoids, paving the way for a deeper understanding of the plant’s pharmacological properties.
  • Brownie Mary (1922-1999): A well-known cannabis activist, nurse, and baker, Mary Jane Rathbun aka Brownie Mary became a symbol of the medical marijuana movement for her efforts to promote the use of marijuana for medicinal purposes while the AIDS epidemic was roaring in the 1980s. Brownie Mary became known for distributing “special” brownies to AIDS patients. Her activism and distribution of medical brownies to those suffering serious illnesses made her a legendary figure in the world of cannabis and also became a symbol of resistance.
  • Lester Grinspoon (1928-2020): An Associate Professor Emeritus of Psychiatry at Harvard Medical School and a legend in the field of psychiatry. Grinspoon’s interest in cannabis began in the 1960s. An unlikely crusader for marijuana, Grinspoon’s research began in 1967 with a goal to prove that marijuana was dangerous. He soon realized that he was mistaken about the dangers of cannabis and in 1971, Grinspoon published ‘Marihuana Reconsidered’ which challenged many of the prevailing myths and misconceptions about cannabis, presenting a thorough examination of the plant, its effects, and its cultural and legal status. His efforts helped shift public opinion and contributed to the changing landscape of cannabis policies in various parts of the world. Today, his ideas and research continue to influence discussions around marijuana, both medically and recreationally.
  • Willie Nelson (born 1933): A long time cannabis user and outspoken advocate for the legalization of marijuana. Nelson has been actively involved in various campaigns and initiatives aimed at changing cannabis laws. He has used his platform to bring attention to the benefits of cannabis and to challenge the stigma associated with its use. Willie Nelson’s advocacy for cannabis extends beyond words; he has actively contributed to the industry by launching his own cannabis brand and supporting organizations and initiatives that align with his views on cannabis policy reform. 
  • Tommy Chong (born 1938): Extending beyond his comedic contributions, Tommy Chong has used his platform to champion cannabis legalization, challenge stereotypes, and contribute to the growing acceptance of cannabis in society. Chong spent nine months in prison at 65, after getting caught up in a federal crackdown on paraphernalia vendors for selling glass bongs under his company named Chong Glass and Nice Dreams. To be clear, Chong’s family never sold marijuana or any drug of any kind—only bongs and pipes. Although it’s been nearly two decades since he left prison, his journey continues as a recognizable and influential figure within the cannabis advocacy community working towards the plant’s redemption story through federal legalization. 
  • Jack Herer (1939-2010): Known as the “Emperor of Hemp,” Herer was a cannabis activist and author of the book “The Emperor Wears No Clothes”. He believed that hemp and cannabis had enormous economic, environmental, and medical potential, and he worked tirelessly to promote their benefits. His work has inspired generations of individuals to question cannabis prohibition and explore the potential benefits of hemp.The famous cannabis strain “Jack Herer” was named as a tribute to Herer’s contributions to cannabis advocacy.
  • Keith Stroup (born 1943): An attorney by profession, Stroup founded NORML in 1970, making it one of the oldest and most well-known cannabis advocacy organizations focusing on and advocating for the responsible use of marijuana by adults, the decriminalization of marijuana possession, and the regulation of marijuana for adults. Under Stroup’s leadership, NORML has worked to change public opinion, influence legislation, and support legal cases that challenge marijuana prohibition.
  • Ed Rosenthal (born 1944): Known as the “Guru of Ganja,” Ed Rosenthal’s multifaceted contributions have had a lasting impact on the cannabis community. His work has not only provided valuable information for cannabis enthusiasts and cultivators but has also played a role in advancing the broader conversation around cannabis legalization, education, and advocacy. His book “Marijuana Grower’s Handbook” is considered a classic in the field, providing valuable insights into cannabis cultivation. Rosenthal has been a vocal advocate for the legalization of cannabis and the rights of cannabis growers.
  • Dennis Peron (1945-2018): Considered the godfather of the legal cannabis movement, Peron was a cannabis activist and co-author of California Proposition 215. As an openly gay man, he actually fought to legalize cannabis well before the AIDS epidemic, but when the disease began to ravage the gay community, Peron fought harder, opened a Cannabis Buyers’ Club, and co-wrote Proposition 215. Dennis Peron’s legal battle for medicinal cannabis rights was a turning point in the legalization movement, helping open people’s eyes to the drug’s benefits for terminally ill patients.
  • Rick Simpson (born late 1940s): As a prominent figure in the alternative medicine community, Simpson’s most notable contribution was his advocacy for the use of cannabis oil in cancer treatment, popularizing “Rick Simpson Oil” (RSO), a full spectrum cannabis extract used for its medicinal properties. While Rick Simpson no longer produces the oil himself, it remains a crucial ingredient in the treatment plans of patients across North America. 
  • Ethan Nadelmann (born 1957): Described as “the point man” for drug policy reform efforts and “the real drug czar,” Ethan Nadelmann is widely regarded as the outstanding proponent of drug policy reform both in the United States and abroad. A scholar and activist, Nadelmann founded the Drug Policy Alliance, an organization that advocates for drug policy reform, including the decriminalization and legalization of cannabis. He played a crucial role in shaping public opinion on drug policy. 
  • Steve DeAngelo (born 1958): Dubbed “the father of the legal industry” , DeAngelo is a lifelong activist, author, educator, investor, and entrepreneur on the front lines of the cannabis reform movement for both medical and recreational use. He has been involved in numerous campaigns and initiatives aimed at changing cannabis laws and policies. His most notable achievements include co-founding Harborside-one of the first six dispensaries licensed In the United States and one of the first to feature a drive-thru; Steep Hill Laboratory, the first cannabis testing and analytics; Arcview Group, the first dedicated cannabis investment network; Last Prisoner Project, a nonprofit organization dedicated to criminal justice reform for nonviolent cannabis offenders; and authoring The Cannabis Manifesto.  He played a key role in the passage of Initiative 59, Washington DC’s medical cannabis law; the passage of Prop 64, California’s adult-use law; and successfully defended multiple legal attempts by US federal authorities to shutter the doors of Harborside.
  • Snoop Dogg (born 1971): A well-known rapper, Snoop Dogg has been a vocal advocate for cannabis legalization. His laid-back and cannabis-friendly persona have contributed to the mainstream acceptance of cannabis, and played a significant role in shaping the perception of cannabis within the entertainment and sports industries. Snoop Dogg’s advocacy goes beyond business and personal use. He has been involved in community initiatives and programs that aim to address social justice issues related to cannabis prohibition, such as advocating for the release of nonviolent cannabis offenders.
  • Jane West (born 1976): A trailblazer for women in the cannabis industry, West is a successful entrepreneur and activist known for organizing and hosting cannabis-centric events that aim to bring together enthusiasts, industry professionals, and advocates.  West has also been a prominent figure in discussions about women in the cannabis industry. She has highlighted the role of women in shaping the industry and has been involved in initiatives that promote gender equality and inclusivity. In 2014, West founded Women Grow, an organization dedicated to empower women in the marijuana industry by providing networking opportunities, mentoring and business support.
  • Charlotte Figi (2006-2020): While not a public figure in the traditional sense, Charlotte Figi’s battle with Dravet syndrome inspired changes to medical marijuana laws across the country and ignited the CBD movement. Her 2013 interview on CNN with Dr Sanjay Gupta made Charlotte a symbol and hero for the medical marijuana and CBD movement.
how-they're-made

HOW ARE MY CANNABIS PRODUCTS MADE?

All cannabis products sold by Canna Remedies are grown and produced in New Jersey by New Jersey state licensed cultivators and manufacturers. It is the role of the cannabis manufacturer to produce the various forms of cannabis such as vape cartridges, edibles, and topicals. 

The post processing steps to manufacture these products differ based on the end product, however, all start with the same process of extraction. Cannabis extraction refers to the process of removing the oil found in the trichomes from the raw cannabis plant and collecting the plant compounds including cannabinoids and terpenes such as THC, CBD, myrcene and limonene. Below is an exploration of the different extraction types and methods.

Live Resin & Distillate Oil

Live Resin refers to the process of extracting oil by freezing and processing live cannabis flower. This process best preserves the cannabinoid and terpene profile for a naturally flavorful extract. Live resin is used in high-temperature consumption like vaping or dabbing, since the THC hasn’t been activated yet because it was done cold.

Basic Steps:

  • Freeze the bud
  • Run butane through it
  • Purge the butane using warm water (no higher than 45℉)
  • Purge the rest of the butane using a vacuum chamber

Distillation refers to the oil being extracted from the cannabis plant using a liquid solvent, often ethanol or pressurized CO2, and then hyper-purified through a process known as winterization. Distillation strips the oil of impurities, including the chemical compounds that give cannabis its flavor and aroma: terpenes. Manufacturers often add terpenes back to THC distillate after it’s been purified to its super-potent form, usually using plant-based terpenes to mimic the flavor of the cannabis plant.

Basic Steps:

  • Start with room temperature cannabis and an extraction medium such as ethanol, BHO, or CO2.
  • Soak the cannabis in the ethanol
  • Break the cannabis up, keep the ethanol really cold
  • Filter the plant matter out of the mixture
  • Heat the mixture to burn off the ethanol
  • Distill it down to pure oil

Cannabis Extraction Processes

Hydrocarbon Extraction

Hydrocarbon extraction, normally achieved using butane or propane, is able to extract a greater variety of terpenes from the cannabis material than the alcohol extraction method.

For products such as vape oils or oral tinctures, where the cannabis extract is unlikely to be masked by other flavors, preserving these terpenes helps to give the extract flavor and aroma.

The process involves cold butane solvent washed over the cannabis plant material to extract its oils. The butane solvent can be easily cold-boiled off to leave an oil with more of a “whole plant” character, as more of the temperature-sensitive terpenes will be retained.

These volatile and flammable solvents present a safety hazard to workers. Hydrocarbon extraction is a very hands-on process and is rarely automated, meaning that there is almost always a human worker in close proximity to the extraction vessel. In the interest of safety, hydrocarbon extraction is done on a much smaller scale, though the speed and efficiency of this extraction method means its overall output still makes it suitable for large-scale operations.

Alcohol 

Alcohol extraction, also commonly referred to as ethanol extraction, is one of the most efficient extraction methods for processing large batches of cannabis flower, and can be done in hot, cold, or room temperature conditions.

Hot alcohol extraction is generally accomplished using cycles of hot alcohol solvent through the solid cannabis flower, stripping the cannabinoids and terpenes from the flower in the process. This often extracts unwanted chlorophyll and plant waxes from the cannabis flower and requires several post-processing clarification steps to fix.

Cold alcohol extraction makes it a little harder for the unwanted polar plant waxes and chlorophyll to dissolve in a polar ethanol solvent.

Room temperature ethanol extraction allows for scalability, ease of post-processing, and energy efficiency. The process involves submerging cannabis flower in a vat of room temperature ethanol solvent. Once the cannabis plant matter is removed, the resulting ethanol/cannabis oil solution can be gradually heated to remove the solvent and leave behind a high-purity cannabis oil containing the most common cannabinoids.

Supercritical CO2

Supercritical CO2 extraction is still considered to be somewhat of a newcomer to the cannabis industry but is already commonly used in other industries for the processing of products such as coffee, tea, vanilla, and perfumes.

The method involves using low pressures and temperatures over a long period of time in specialized equipment to turn gaseous CO2 into a supercritical fluid. When passed over cannabis material, the fluid can easily extract plant waxes and oils from the cannabis.

Unlike alcohol or butane, CO2 is a highly tunable solvent, meaning you can pull unique compounds from botanicals at different pressures and temperatures. CO2 is also safer than many hydrocarbon techniques which use flammable and toxic solvents like butane.

Water

Water extraction utilizes a solvent-less method of extraction that submerges the cannabis plant in freezing water. The plant is stirred in the cold water causing the trichomes to separate from the plant.

Once the trichomes fall off of the plant, it will pass through a series of screens. The end result is a product that has 50% to 70% THC levels.

Isopropyl Oil

Dried cannabis flowers are soaked in isopropyl alcohol and then shaken gently. Isopropyl strips the trichomes from the plant. The mixture is strained into a dish and then the solvent is removed using a vacuum oven that keeps temperatures under 181 degrees. When the solvent evaporates, the remaining substance is a THC rich oil.

How it's grown

HOW IS MY CANNABIS GROWN?

All cannabis products sold by Canna Remedies are grown and produced in New Jersey by New Jersey state licensed cultivators and manufacturers. Cannabis cultivators refers to the companies who plant, grow, harvest, dry, cure, grade, and trim the cannabis buds. Below explores the different environments and techniques these cultivators are using to grow and harvest your bud.

Growing Environments for Cannabis

  • Outdoor – exposes a crop to a natural environment offering natural light and significantly reducing costs for growers. This can also lead to an exposure to harsh environmental conditions such as rain, insects, extreme weather conditions, and invasive plants such as thistle. Outdoor cannabis cultivation relies on the available sunlight during the changing seasons, during which the plant is exposed to the full spectrum of light available in nature at that time of year. Outdoor cultivators experience a longer growth cycle and typically only harvest once a year.
  • Greenhouse – Greenhouse grows offer the free sunlight of an outdoor grow, but with far greater environmental control. Greenhouses allow growers to control natural light with a blackout shade or similar roof covering system. Greenhouses also offer a layer of protection from animals, pests, and extreme environmental changes. A risk in greenhouse growing is that pests can spread inside the enclosed environment at a faster rate. Protection against environmental crossover is also limited depending on the type of greenhouse structure.
  • Indoor – Growing marijuana indoors requires artificial lighting and use of air conditioning and dehumidification systems to mimic the elements of the outdoors. High upfront costs is the major downside of growing marijuana indoors for beginners.

Growing from Seed or Clone

  • Seed – Plants grown from seed are the preferred method for outdoor cannabis cultivation because it makes for a more durable plant, and has a greater yield potential than clones. These from seed plants are also more resistant to pests, illnesses, and diseases. The downside to growing cannabis from seed each time are inconsistencies in the phenotype, or observable physical characteristics and chemical traits, of the parent plant. This causes variances in the cannabinoids and terpenes profiles and effects
  • Clone – Cannabis clones refer to the replication of a single parent plant outside the means of sexual reproduction. This is done by taking cuttings from a mature cannabis plant that can be rooted and grown into a new, genetically identical plant. Clones are preferred for indoor grows looking for consistency in their products. When grown under the exact same environmental conditions as the mother plant, a clone is infinitely more likely to exhibit the mother plant’s physical traits, cannabinoid and terpene profile, and ability to take in nutrients and resist pests or fungi. Plants grown from clones also allow growers to determine which environmental conditions will maintain those ideal genetics, and determine optimal feeding schedules, flowering times, and nutrient recipes. If plants are exposed to adverse environmental conditions for which they have no genetic defense, an entire crop can be wiped out.

Cannabis is grown and then harvested at the end of the flowering cycle. Harvesting requires cutting each bud-laden branch off near where the branch meets the main stem. After harvesting a cannabis plant, buds have to be trimmed, dried, and cured before they can be consumed. A proper dry and cure are necessary so mold doesn’t develop in the buds. 

Cannabis is typically trimmed to remove the excess sugar leaves that, while consumable, have a smaller concentration of trichomes than the flower and can be harsh when smoked. Ideally, this is done over a screen to collect any trichomes that may break off the plant. Plants are then left hanging upside down to dry until the stems slightly snap when bent. Once dried the curing process can begin. This is a prolonged process of removing moisture from the flowers under controlled environmental conditions to allow the conversion of non-psychoactive cannabinoids like THCA to continue to gain potency. Quick drying under warm, dry conditions halts this process much faster. A slow cure at low temperatures will preserve these terpenes better than a quick, hot cannabis drying process. Curing is complete when the flowers feel a little crunchy on the outside and the smallest branches snap when you bend them rather than fold.

cannabinoids

WHAT ARE CANNABINOIDS?

Cannabinoids are chemical compounds that interact with cannabinoid receptors. These receptors are present in various tissues and cells throughout the human body. When a cannabinoid meets a receptor, it can cause an effect to occur within the cell. It’s helpful to think of it as a key fitting into a lock. The locked door (cannabinoid receptor) will not open until a particular key (cannabinoid) is inserted and turned in the lock.

Types of Cannabinoids

Endocannabinoids: Made by the human body.

Phytocannabinoids: Naturally found in the cannabis plant and some other plants.

Synthetic Cannabinoids: Man-made compounds created in a lab to mimic endocannabinoids.

There are over 124 different cannabinoids in cannabis, each with its own unique effects.

Common Cannabinoids

THC (delta 9 – Tetrahydrocannabinol)

  • Well-known for its euphoric or psychoactive effects.
  • Medicinally reduces pain, nausea, and stress.
  • Can stimulate appetite and help with sleep issues.

 

CBD (Cannabidiol)

  • Non-psychoactive and renowned for reducing symptoms in seizure and spasm disorders such as epilepsy or multiple sclerosis.
  • Reduces inflammation and pain, producing a calming effect.
  • Often recommended for clarity without the “high” feeling and to counteract THC’s effects.

 

CBG (Cannabigerol)

  • Considered the “Precursor Cannabinoid” because CBG converts to other cannabinoids as the plant matures.
  • Non-psychoactive and acts as a buffer to THC’s psychoactivity, which helps to reduce paranoia that is sometimes caused by higher levels of THC.
  • Reduces inflammation, pain, nausea, and intraocular eye pressure.

 

CBN (Cannabinol)

  • Mildly psychoactive and derived from THC-A.
  • Sedative properties, aids in pain and inflammation reduction.
  • Reduces intraocular eye pressure and seizure frequency.

 

CBC (Cannabichromene)

  • Non-psychoactive, supports neurogenesis (developing brain cells).
  • Reduces inflammation, especially when combined with other cannabinoids.

 

THCV (Tetrahydrocannabivarin)

  • Psychoactive, found in cannabis sativa strains.
  • Produces a motivated, alert, and energizing feeling.
  • Neuroprotective properties, reduces stress, anxiety, and appetite suppression.

 

Why the ‘A’ After Certain Cannabinoids?

The cannabis plant initially produces cannabinoids as carboxylic acids, so sometimes you will see THC-A, CBD-A or THCV-A on product labels for cannabis flower or live manufactured products. Exposure to heat and light (decarboxylation) activates them, allowing them to attach to receptors in the body and create the intended effects.

Product has been added to your cart